你现在的位置:首页>企业动态>

登录登录针筒应怎样清洗?

浏览:
After a long-term use of the glue dispenser, attention must be paid to cleaning the dispensing syringe. Otherwise, problems such as solidification and blockage caused by residual glue will affect the gluing effect of the equipment. How should the dispensing syringe of the dispenser be cleaned?
登录登录针筒清洗的三种方法:
Three cleaning methods for dispensing syringe of glue applicator:
常用清洗方法:首先要了解登录针筒清洗的原因,简单的方式就是在胶水没有固化之前进行清洗,这时可以使用一些稀释溶液,双组份登录批发,这样就可以把胶水部分性质破坏然后进行清洗,只需把内部溶液倒出即可,这是比较方便的登录针筒清洗!
Common cleaning methods: first of all, we should understand the reasons for the cleaning of dispensing syringe. The simple way is to clean before the glue is solidified. At this time, we can use some diluted solution and wholesale the two-component glue applicator. In this way, we can destroy the properties of the glue and then clean it. Just pour out the internal solution. This is a more convenient way to clean the dispensing syringe!

固化之后的清洗方法:针筒固化之后,基本无法进行涂胶,这时是必须要对登录针筒进行处理。不过胶水固化之后对清洗造成一定的难度,需要易得特殊的化学物质溶液,将胶水化学分子打破,这时候才能进行清洗!
Cleaning method after curing: after the needle cylinder is solidified, it is basically impossible to apply glue. At this time, the dispensing syringe must be treated. However, it is difficult to clean after the glue is solidified. Special chemical solution should be used to break the chemical molecules of the glue. At this time, the cleaning can be carried out!
清洗方法:使用绿色循环液进行清洗,这种方法是既简单又有效果,清洗效果特别快而且干净,对于涂胶作用影响低,可以保持登录良好的使用状况,是划算、安全的清洗方式,这种清洗方式能够广泛适用不同类型的登录设备!
Efficient cleaning method: use green circulating liquid for cleaning. This method is simple and effective. The cleaning effect is very fast and clean. It has a low impact on the gluing effect. It can keep the good service condition of the gluing machine. It is a cost-effective and safe cleaning method. This cleaning method can be widely applied to different types of gluing machine equipment!

上一篇:如何解决中空玻璃登录的磨损情况呢?
下一篇:双组份登录设备注油的保养

  • 官方微信
亚洲必威官网千亿qy官网注册送88宝运莱bao1008610BET注册